无梁拱形波纹钢屋盖山墙抗风柱。盖山简单拱形屋顶墙抗风柱按照常规设计即可。一般情况下金 属拱形波纹屋盖工程宜为封闭式。开敞或半开敞情形,屋盖和下部结构由于风荷载的不确定性，受力情金属拱形波纹屋盖与下部结构的连接般采用铰接, 也可以采用固接。按照简化的计算模型下部结构的设计与传统结构相比要简单的多。根据上部拱形波纹钢屋盖结构分析计算的支座反力拱形屋顶彩钢活动房价格设计下部结构的圈梁、柱(墙)和基础,整 个结构可简化为一系列的静定构件进行分析、计算和设计。
Wind resistant column of gable wall with arched corrugated steel roof without beam. The wind resistant column of simple arched roof wall can be designed according to the conventional design. Generally, the arched corrugated metal roof should be closed. In the case of open or semi open, due to the uncertainty of wind load on roof and substructure, the connection between metal arched corrugated roof and substructure is usually hinged or fixed. According to the simplified calculation model, the design of substructure is much simpler than that of traditional structure. The ring beam, column (wall) and foundation of the lower structure are designed according to the analysis and calculation of the upper arched corrugated steel roof structure. The whole structure can be simplified as a series of static components for analysis, calculation and design.
拱形波纹钢屋盖情况较为复杂和预测，此时应当封闭屋盖两端圈梁以上的部分山墙,必要时设置抗风柱。这样一方面可以美化屋盖的建筑效果,更为重要的是增加了屋盖的整体刚度增大了其抗风能力。
The situation of arched corrugated steel roof is more complicated and predicted. At this time, some Gables above the ring beams at both ends of the roof should be closed, and wind resistant columns should be set if necessary. On the one hand, it can beautify the building effect of the roof, and more importantly, it increases the overall stiffness of the roof and increases its wind resistance ability.
诸如拱形波纹钢屋盖结构拱脚点的防水、防腐处理采光带、通风帽的设置及节点处理保温、避雷和防火等。
Such as waterproof, anticorrosive treatment, daylighting belt, ventilation cap and joint treatment, heat preservation, lightning protection and fire prevention of arched corrugated steel roof structure.